C.M.H.T.

Labratory Assistant 2

May 2022 - April 2023

As a dedicated team member at the CMHT laboratory (Center for Mechatronics and Hybrid Technologies), I worked diligently from May 2022 to August 2022 as a full-time employee, and continued to contribute part-time from September 2022 to April 2023. My responsibilities included not only utilizing National Instrument Devices and Python to communicate and send signals for battery fault testing and stator fault testing, but also taking on additional tasks such as maintaining the lab, selecting fuse breakers, and assisting in finding quotes for essential laboratory equipment. Additionally, I successfully designed and produced a PCB for battery calibration to act as a capacitor.
pic

Timeline

May 2022

Joined the team. Worked on Lab Maintenance.

June 2022

Worked on LabVIEW Programs for communicating with National Instrument Devices.

pic
Figure 1 - National Instrument Device, Thermocouple Module

July 2022

Worked with the National Instruments "NIDAQ" API to communicate with the DAQ devices.

September 2022

Worked with battery testing with the NI devices.

pic
Figure 2 - National Instrument Device with Power Supply.

November 2022

Worked on communicated with the barcode reader using COMPORT communication in windows shell.

January 2023

Worked on producing a PCB in Altium to produce a small capacitor and resistor using layers for battery calibration.

pic
Figure 2 - Capacitor PCB

March 2023

Worked on Dynomometer room maintenance and produced quotes for switch breakers.